High Visosity Color Yeild and Soft Diperse printing Thickener Kr-712

• Customization: Available
• CAS No.: 25035-69-2
• Certification: Oeko-Tex
• Model NO.: KR-712
• Environmental Protection: Yes
• Color: White
• Kind: Pringting and Dyeing Auxiliary Products
• Appearance: Milky White Viscous Emulsion
• Application: Textile Printing Auxiliary, Post-Processing Auxiliary
• Dosage: Suggestion Dosage 2.5-3%
• Transport Package: Drums
• Specification: 50kgs/130kgs/150kgs/160kgs
• Trademark: KERUN
• Origin: China
• HS Code: 3809910000
• Production Capacity: 10000000kgs/Year

Product Description

SECTION 1: PRODUCT AND COMPANY IDENTIFICATION                          
Product name: DISPERSE PRINTING THICKENER KR-712
CHEMICAL NAME: ACRYLATE COPOLYMER 40.0-42.0%, EMULSIFIER 16.0-20.0%, WATER 38.0-44.0%.
CAS NO.: 25035-69-2, 1338-43-8, 7732-18-5
RESPONSIBLE ENTERPRISE: QINGDAO KERUN BIO-TECHNOLOGY CO.,LTD.  
Supplier: QINGDAO KERUN BIO-TECHNOLOGY CO.,LTD.
 
SECTION 2: COMPOSITION/INFORMATION ON INGREDIENTS
Chemical synthesis from various monomers

SECTION 3: HAZARDS IDENTIFICATION
Eye contact: May cause eye irritation, redness, tearing 
Skin contact:No bad effect if contact with skin

SECTION 4: FIRST AID MEASURES
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If feeling that it is difficult to breath or have contacted for a long time, Consult a physician.
In case of skin contact
Immediately take off the clothes, washing with plenty of water using the soap or special detergent.
In case of eye contact
You should rinse the eyes for 10 minutes. If the eyes are still very afflictive, please seek medical attention.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Drink plenty of water. Consult a physician.

SECTION 5: FIREFIGHTING MEASURES
5.1 Extinguishing media
Suitable extinguishing media
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
5.2 Limits   No limit
5.3 Fire/Explosion hazard    No
5.4 Main burning gas      NH3
5.5 Personal protection     Nose and mouth breathing respirator

SECTION 6: ACCIDENTAL RELEASE MEASURES
6.1 Personal protection
Wear appropriate rubber protective gloves and chemical safety goggles, people without protective equipments should leave.
6.2 Environmental precautions
Do not let product enter sewage system, pot holes, soil. Discharge into the environment must be avoided.
6.3 Methods and materials for containment and cleaning up
Sweep up and shovel into containers marked as chemical waste. Keep in suitable, closed containers for disposal.

SECTION 7: HANDLING AND STORAGE
7.1 Occupational health      
Avoid swallow, inhale, contact with skin and eyes, follow good industrial health habits and rules
7.2 Fire prevention        No special measures
7.3 Storage requirements   Store in shady, dry, ventilated place. 
7.4 Quarantine measures   No special measures
7.5 Storage conditions
Minimum storage temperature : ≥-2°C
Maximun storage temperature : ≤55°C
Keep container tightly closed, in a well-ventilated workplace. 

SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1 Occupational exposure limits   See related laws and regulations
8.2 Basic personal protection
Wear appropriate rubber protective gloves and chemical safety goggles, people without protective equipments should leave.

SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
9.1 Information on basic physical and chemical properties
a) Form: emulsion  
b) Color: milky white to light yellow emulsion
c) Odour: Slightly alcohol odour 
9.2 Relevant safety data
a) Auto-ignition temperature       >350°C
b) Explosion limits               no hazards of explosion
c) Flash point                   >160°C
d) Density                      0.95-1.05g/cm³
e) Water solubility               Any dilute ratio with water
f) pH                          6.0 -7.0  (at 25 °C)
g) Ionicity                      Anionic